Smart Plant
Welcome to the documentation page of the Smart Plant V1, a device to monitor the environmental conditions of your favourite plant.
With the Smart Plant V1 you can measure a range of paramaters such as the soil moisture, ambient light and the air temperature & relative humidity. In adition to the IoT capabilities of streaming the measured parameters into your favourite platform, like Home Assistant, you can read the data directly on the integrated 2.9” e-paper display.
As you can imagine, all this features would be useless if the design is not optimized to consume the lowest energy possible: thanks to the deep-sleep features of the ESP32 microcontroller, a selection of low-consumption electronics (high-efficient LDOs in standby modes, power-switched sensors and partially refreshed e-paper) and the optional solar cell.
Everything packed in a quite compact but elegant device that can be directly plugged into your plant’s pot.
Contents
- Safety guidelines
How to operate and manipulate the Smart Plant V1.
- Getting started
First steps for configuring and working with the Smart Plant V1.
- Schematics and drawings
Design files of the Smart Plant V1.
Technical support
If you have technical problems or cannot find the information that you need in the provided documentation, please contact me directly:
- Author:
J.G.Aguado
- Contact:
- Board:
Smart Plant V1
- Revision:
1
- Date:
April 02, 2023